Best Budget Miter Saw Under $200 in 2019 [Buying Guide]

A miter saw is a tool of precision used to make accurate miters and crosscuts in a workpiece where a mounted circular blade is pulled down onto a board in a quick motion.

A miter saw is also known as a drop saw, and its types are a compound miter saw or a sliding miter saw.

For more information regarding the difference between them, check the buyer’s guide at the end of the article.

what is a circular saw used for

Without further ado, here are some of the best miter saws under 200 dollars you can find on the market.

Top Picks for 2019

Model
Price
Size
Rating
Hitachi C10FCH2
Check Price
10-inch Single Bevel
Compound Miter Saw with Laser Marker
4.8/5
Hitachi C10FCG
Check Price
10" Single Bevel
Compound Miter Saw
4.7/5
Homecraft H26-260L
Check Price
10-Inch Compound Miter Saw
4.5/5
WEN 70716
Check Price
10-Inch Sliding Compound Miter Saw
4.4/5
Makita LS1040
Check Price
10" Compound Miter Saw
4.3/5
Genesis GMS1015LC
Check Price
10-Inch Compound Miter Saw
4.1/5

The Best Miter Saws Under 200 Dollars

1. Hitachi C10FCH2 - Best laser Guided Miter Saw

The Hitachi C10FCH2 has a great laser-marking system that you can easily activate with a switch and which helps you make the most precise cuts.

This helps you minimize errors and make difficult delicate cuts.

Moreover, the Hitachi C10FCH2 has a 15 AMP motor which gives you enough sawing power to cut through tough materials with a blade that spins at speeds up to 5,000 rotations per minute.

The impressive thing about it is that it works quietly as well.

The blade is a 10-inch 24-tooth one so it works on a wide range of materials and doesn’t require constant replacement.

Its miter angle ranges from 0 to 52 degrees left and right while its bevel angle ranges from 0 to 45 degrees left. Furthermore, it only weighs 26.5 pounds which means you can easily carry it around to different sites.

The integrated clamping mechanism secures it comfortably on any table or surface so you can work with safety and precision.

Finally, the fact that it comes with a 5-year warranty means guaranteed performance and durability.

Pros
Things we Liked

  • Precise laser-cutting
  • Compatible with any workstation
  • 5-year warranty
  • Durability and portability

Cons
Things We Didn’t Like

  • The covering bag is substandard

Whether you’re looking for the good performance, durability, and affordability, you’re going to find it all in the Hitachi C10FCH2. Relative to the low price point, it’s pretty powerful and efficient.

2. Hitachi C10FCG - Best Miter Saw for the Money

Hitachi C10FCG

The Hitachi C10FCG is a pretty versatile tool as you can use it to work with materials like plywood panels, hardboard, and aluminum sashes.

Its die-cast aluminum base guarantees the stability of performance.

It could use the soft start feature that makes sure the motor doesn’t jump when powered, however.

The miter angle ranges from 0 to 52 degrees to the right and left and the bevel one ranged from 0 to 45 degrees.

This provides you with a lot of flexibility and the accuracy to make precise and clean bevel cuts.

Working on a 2.57 horsepower, 15 AMP motor that can provide you with 5000 rotations per minute, the Hitachi C10FCG is able to take on the toughest cutting jobs.

It weighs around 24.2 pounds which makes it easy to maneuver and transport.

Moreover, it has a large table and a vice clamping system to provide you with material support and enable you to secure the workpiece in place.

Pros
Things we Liked

  • Lightweight and portable
  • Best Price
  • Satisfactory power
  • Quite reliable
  • The blades are easily changed
  • A 5-year warranty

Cons
Things We Didn’t Like

  • The dust bag isn’t easy to use

The Hitachi C10FCG is a very affordable miter saw, even compared to the budget-friendly options. The dust bag design could be a little more convenient, but overall, its performance is more than satisfactory.

3. Homecraft H26-260L - Best Miter Saw for Crown Molding

Homecraft H26-260L

Combining a powerful 14 AMP motor that runs at 5,500 rotations per minute, portability at a weight of 25 pounds, and a strong 10-inch carbide blade, you can cut through any material easily.

Even cutting tough or wet timber will be a breeze.

In a single pass, you can cut 4×4 or 2×6 at 90 degrees or make 2×6-inch bevel cuts.

However, the clamp doesn’t give you a lot of room to work with larger workpieces as it struggles with anything over 5.5 inches.

The Homecraft H26-260L can cut bevel angles up to 45 degrees left and has adjustable bevel stops for added precision at 0 degrees, 15 degrees, 22.5 degrees, 30 degrees, and 45 degrees.

It can also cut miter angles ranging from 0 to 52 degrees both to the right and to the left for maximum flexibility.

The fact that the head only tilts –as with all single-bevel saws- means that you’re going to have to physically move the workpiece.

The Homecraft H26-260L comes with a battery-powered alignment laser that’s supposed to make your cuts more precise.

Moreover, it has a horizontal clamp that securely holds your workpiece to prevent any shifting in its alignment.

If you’re going to be changing the blade on your miter saw, you’ll appreciate the spindle lock on the Homecraft H26-260L the safely holds your blade in place during the process and allows you to loosen and remove the blade nut.

Finally, the Homecraft H26-260L’s handle has a comfortable grip and a texture that’s easy on the hands.

This allows you to work for longer intervals without getting tired or experiencing fatigue in your hand.

Pros
Things we Liked

  • Doesn’t compromise on the quality for the cheaper price
  • Easy to assemble
  • 3-year limited warranty
  • Compatible with almost all miter saw stands
  • Accurate laser cutting
  • Spindle lock to ensure safety when changing saw

Cons
Things We Didn’t Like

  • The clamp can’t handle bigger-sized stock

The Homecraft H26-260L is a great inexpensive and portable saw that is perfect for your small woodworking projects.

4. WEN 70716 10-Inch Sliding Compound Miter Saw- Best Choice for Laminate Flooring

With its 15 AMP motor, the WEN 70716 can reach a spinning force of 5,500 rotations per minute –this beats all the miter saws of this price range and even higher price ranges.

This ability is what makes the WEN 70716 stand out in terms of capacity to cut through thicker lumber and helps you finish your work a lot faster.

Moreover, the WEN 70716 provides you with more than enough table space to make accurate miter cuts on large boards.

The accuracy of the cuts is enhanced greatly thanks to the 60-tooth carbide blade on the WEN 70716.

It cuts very cleanly through any size of wood using crosscuts or miter cuts.

A completely dust-free work environment when you use a miter saw is practically impossible, but the WEN 70716 does a pretty good job at keeping it clear and collects most of the sawdust.

Furthermore, the WEN 70716 provides you with a good fence and a strong clamp –two features that define the quality of your miter cuts and crown molding.

With the clamp, your work will be faster and fewer errors are likely to happen. Add the robust fence and you have both accuracy and stability.

Finally, the WEN 70716 comes with a convenient carrying handle that allows you to transfer the saw from one site to another easily.

Pros
Things we Liked

  • Highly affordable
  • Easily portable
  • Works great for deep cuts
  • Versatile and strong for its price range

Cons
Things We Didn’t Like

  • Some burning smell at first due to the insulation
  • Lacking instruction

The WEN 70716 10-Inch Sliding Compound Miter is simply one of the best value for the money miter saws you can get.

It’s pretty cheap but gives you amazing features that beat miter saws of a higher price tag.

5. Makita LS1040 10-Inch Compound Miter Saw - Best Miter Saw for Beginners

Makita LS1040

The Makita LS1040 provides you with all the basics you need from a miter saw, like the power and accuracy, at an affordable price.

Its powerful 15 AMP motor spins the blade at 4,600 rotations per minute.

Furthermore, it provides you with the accuracy of performance thanks to its fence and precision machined aluminum base.

This eliminates any wiggling and holds your workpiece firmly in place as you make your cuts.

Its miter angle ranges from 0 to 45 degrees left, and 0 to 52 degrees right while its bevel angle ranges 0 to 45 degrees left.

You can lock the miter stop to nine angles: 15, 22.5, 30, and 45 degrees on both the left and right sides. You also get a 90-degree miter stop.

Both the adjustments of the miter and bevel are easy to set and absolutely secure when you lock them in place.

It’s portable enough at 27.3 pounds. However, it lacks a stand, but you can get a separate one.

Another drawback  -but a major one- is the poor dust collection of the Makita LS1040.

However, seeing that most miter saws don’t offer effective dust-collection, it doesn’t make the Makita LS1040 less favorable.

Being a non-sliding saw means that you won’t get any deflection of the blade and thereby the most accurate cuts.

Pros
Things we Liked

  • Powerful motor
  • Very stable performance
  • Superb fence

Cons
Things We Didn’t Like

  • Subpar dust collection
  • Not suited for wider cuts

6. Genesis GMS1015LC 10-Inch Compound Miter Saw with Laser Guide

Genesis GMS1015LC

The Genesis GMS1015LC can tilt 45 degrees to the left with regular stops for quick and seamless bevel cuts.

It also makes miter cuts at 45 degrees both to the left and right.

The laser system also works on helping you make accurate cuts that are never off the mark.

It’s true that the innate capacity of the saw isn’t that big, however, it does come with two extensions that enable you to work on some larger pieces.

For the affordable price, it still has a powerful 15 AMP motor and an arbor lock that enables you to make quick blade changes.

Furthermore, the blade guard and electric brake contribute greatly to keeping you safe on the job.

Small, portable, and lightweight, the Genesis GMS1015LC makes a great on-the-job miter saw that you can easily bring with you to any location.

Pros
Things we Liked

  • Included extension wings provide an increased cutting capacity
  • Highly affordable
  • Light and portable
  • Seamlessly performs miter and bevel cuts

Cons
Things We Didn’t Like

  • Not easy to get a hang of the laser system
  • Subpar durability
  • A little too much vibration

How to Choose The Right Miter Saw:

Before you buy your miter saw, make sure you’re familiar with all the features and how they affect your work.

In this small buying guide, we’ll try to give the information on just that.

Saw Type

There are 3 types of miter saws: Stationary compound, sliding compound, and sliding dual compound (also known as double or dual bevel).

It’s only natural that the more sophisticated the design of the miter saw, the higher its price is.

Stationary compound miter saws have the ability to make miter cuts to the left and right but bevel cuts in only one direction.

This is where sliding compound miter saws beat them as they’re able to move forward and back along the rails.

The sliding dual compound miter saw beats both as it can do everything the two do but also make bevel cuts to both the right and left.

However, none of the recommendations on the list belong to this category as it wouldn’t have been under 200 dollars.

A sliding design is superior because it increases the blade’s crosscut capacity where a 12-inch blade would be able to cut up to 16 inches, for example.

Power Source

The corded miter saws’ motors usually run on 10, 12, or 15 AMPs.

The stronger the motor is, the better the wide crosscuts or the use of hardwoods and the easier it is to get through tougher materials.

So if you’re going to be working with plywood or mahogany you should get a 15 AMP motor.

On the other hand, thinner woods like pine or composite material can be cut with a less powerful motor.

Blade and Capacity of Crosscuts

You can find miter saw blades ranging from 8.25 inches to 8.5 inches, to 10 and even 12 inches in diameter.

The bigger the diameter of the blade, the longer the cut. In other words: bigger crosscut, miter, and bevel capability.

You should make sure that the blade or the combination of the blade and slide capacity exceeds the widths of your molding or lumber.

It’s worth mentioning that the 10-inch blade has an advantage over the rest as it’s interchangeable with a table saw.

This means that you’ll be spared the need to buy 2 sets of circular blades as long as you’re okay with taking the time to swap the blades between your table and miter saw.

The smaller 7.25-inch blades are abundant and readily available, which gives them a huge advantage.

Moreover, keep in mind that the higher the tooth count on the blade, the higher the price, but also the cleaner the finished cuts in any material.

This means you’ll be spared the need to sand your workpiece after you’re done.

Angle Ranges and Detents

Almost all miter saws will be able to cut 45 degrees, although some have a capacity that goes higher than that and up to 48 degrees.

Some dual compound saws have asymmetric ranges like 50 degrees to the left and 62 degrees to the right.

Positive stop detents are highly recommended. They’re mechanical catches that lock the saw’s movement until they’re released.

This helps you reach and maintain the most accurate angle for your cut. The most common angles are 90 degrees, 45 degrees, and 22.5 degrees.

Some saws will have fewer bevel detents or none at all, but it’s better if you find one with a 0 degree and 45 degrees one.

Fences and Material Supports

The fence on a miter saw helps secure the wood during the cut. Make sure the material is firmly pressed against the fence –especially smaller stock.

You can find fences in varying heights and some have the ability to slide out to extend support for longer places.

If you’re going to be working with crown molding or any tall stock, go for taller fences for better support.

Dust Collection

Generally, compound miter saws don’t have the best dust collection.

However, this doesn’t mean you shouldn’t still look for one with good dust-extraction capabilities as the sawdust can be harmful to the lungs over extended periods of time. It’s also slippery and might cause you to fall.

Since miter saws are usually used in a shop, garage, or even inside the house, collecting the dust produced by the sawing is very important to keep the place tidy.

Some Extra Features

Always look for a miter saw with a good clamp as they are crucial when it comes to getting the most accurate cut.

Also, never compromise on the stand as it’s the part that holds the saw securely and limits its vibration and wobbling.

It also gives you extended support for cutting longer stock.

Material stops are definitely a big plus as they spare you the need to mark multiple boards for the same cut. You just set the stop and start cutting.

Electric brakes are also a nice addition that enables you to stop the saw blade quickly when you’re transitioning between cuts.

Safety

We saved the best for last. A miter saw works with an exposed, spinning blade. If that doesn’t call for safety, we don’t know what does.

Always wear eye and hearing protection. If you’re working indoors with a poor or no dust extractor, it’s important that you wear a mask.

Make sure the blade brake is working well and that once you release the trigger, the blade is stopped within a few seconds.

Miter Saw: FAQs

Do I Need Anything Else With My Miter Saw?

Depending on what kind of job you’ll be doing with your miter saw.

If you’re going to be doing a lot of job-location projects, you should make sure you have a reliable miter saw stand with you.

Stand work as a lightweight and portable workbench that has extensions for board supports and board stops.

Typically, the legs fold underneath and the stand has wheels on one end.

Your miter saw will clamp down on the cross rails to stay in place as you roll the stand around to where you need it to be.

A tri-square is also recommended so you can quickly test your cuts to make sure you have the perfect 90 degrees or 45-degree angle.

An angle guide is also a good idea if you’re going to be setting up custom angles.

How’s a miter saw workbench different than a standard one?

It’s a little more complicated than the flat top standard one. The base and the sides can be used for things like shelving or drawers.

Its top is designed specifically to facilitate the cuts you make with your miter saw and make them more accurate.

How Important is a Laser Guide?

The short answer is: not that important.

A laser guide can be really helpful if it works well and has good visibility. However, chances are you’re going to be using your saw outside or in a well-lit room, so the red diode is a bit hard to see.

Some high-end saw models have moved to use green diodes, but those are pretty expensive.

The simple solution is the LED light that casts the blade’s shadow onto the material you’re cutting.

Since its the blade’s own shadow, it’s always accurate.

Final Thoughts

Since this article is for miter saws that are less than 200 dollars, none of the recommendations would really break your bank.

If you’re looking for the cheapest one that provides you with the best work, you should go for the Hitachi C10FCG Miter Saw.

If you’re going to be working with larger pieces or if you want to achieve deeper cuts, you should opt for the WEN 70716 10-Inch Sliding Compound Miter Saw.

If you want to cut tougher materials but the width of the workpiece doesn’t concern you, the Homecraft H26-260L 10-Inch Compound Miter Saw would make a great choice for you.

Ryobi TS1345L Miter Saw is one of the best recommendations overall, it combines everything you’ll be looking for in a miter saw.

Finally, if you’re going to be moving around a lot or if you’re going to work at different locations, the Hitachi C10FCH2 would serve you pretty well thanks to its portability.

Close Menu